[. . . ] Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. [. . . ] An incorrectly mounted bit is extremely dangerous since it can fly off or break during drilling. Do not wear loose clothing or jewellery, they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. While operating, the work piece must be securely held with the vise or the clamp etc. In this case, sound insulation and hearing protection measures must be taken by the operator. This tool is started and stopped by squeezing and releasing the trigger switch (A). The speed can be adjusted in the high gear or in the low gear, by controlling the frigger-squeezing force. For continuous operation, press the lock button (E) while squeezing the frigger. Voltage Chuck capacity Drilling capacity in wood in steel in masonry Input No load speed Blows per minute Net weight Safety class II 230 V ~ 50 Hz 13 mm (1/2") 40 mm 13 mm 16 mm 750 W 0 - 2, 800 min-1 0 - 44, 800 min-1 2. To change the rotation direction, stop the tool and push the forward / reverse button (B). When the forward button is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. [. . . ] In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. [. . . ]